Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Required accessories and tools
Supplied accessories
Installation instructions
■
Operating instructions
■
Installation kit
■
Optional accessories
Freedom Heater Kit for Side-by-Side Installation
HEATKITB80
If the gap between the appliances is less
than 6" (160 mm).
Other required accessories
Ice maker installation kit
For connecting appliances which require water, e.g. for
an ice maker.
Maximum outer diameter of the water pipe (without
fittings):
/
" (9.5 mm).
3
8
Miscellaneous
Stepladder
■
Dolly, hand truck
■
Hammer drill for drilling holes in wall or floor
■
Bits according suitable for material and in different
■
sizes
Wooden beam (cross section min. 3" x 4") as an
■
alternative tip protection, length according to the
width of the installation niche
Wooden screws in different sizes
■
Thin plywood sheet, particle board or cardboard
■
to protect the floor from damage
Suitable material for covering and protecting
■
furniture (e.g. protective sheets)
Adhesive tape
■
Note:
Before using, check whether the removed adhesive
tape leaves adhesive residue on the work surfaces!
Otherwise do not use on high-quality work surfaces.
/
" OD copper line
1
4
Tools
en-us
Cordless screwdriver
Torx bit T20 / T30 +
magnetic holder
Torx screwdriver T20
/
" (8 mm) hex nut driver
5
16
Wood drills in different sizes
Open end wrench
/
"
1
2
(SW 13 mm)
Multigrip pliers
Adjustable wrench
Cutter with adjustable blade
Metal tape measure, folding
rule
Square
Level, length 2' (60 cm) and
4' (1.2 m)
Level, min. 4' (1.2 m) long
9
Capítulos
Tabla de contenido
