Zhermack Hurrimix 2 C305140 Manual Del Usuario página 21

As of this moment Zhermack is relieved from all liability if any
type of modification or tampering is made on the equipment
without previous written authorisation from the Manufacturer.
Consequently, any repairs made by unauthorised staff, use of
non-original spare parts or failure to comply with the installation
standards specified in this manual shall immediately render the
warranty null or void.
2.3 AUThORISED STAFF
The staff in charge of the equipment is divided into the following categories:
Operator - user
Person trained to use this equipment (dentist, assistant, orthodontist).
He performs all tasks necessary for operation of the Hurrimix
as: use, cleaning, inspection and simple interventions linked to normal
equipment use. The operator-user must operate with the equipment
mounted according to that stated in this manual.
Before using the equipment or carrying out any intervention on
it, the operator must read the entire manual carefully. This
manual has been drawn up to provide the user with essential
information on rational, safe use of the equipment. The user
must comply with the information given at all times. The user
must also use the worksheets, attached to this manual, to keep
a record of maintenance interventions, component replacement
as well as make notes regarding anomalous functioning.
Maintenance technician authorised by Zhermack
Person who operates in all operating conditions and at all safety levels to
perform repairs/ mechanical and electric adjustments, periodic preventive
maintenance and replacement of any components.
2.4 GENERAL SAFETY PROVISIONS
The operator must comply with the advice and warnings given below in
order to ensure safe, long-lasting equipment performance:
• do not allow untrained staff to use the equipment;
• prepare an optimal worktop, making sure that the operational space is
free from obstacles, clean and has suitable lighting;
• avoid distractions when using the equipment;
• it is prohibited to work objects with features different from those for
which the equipment has been designed;
• to isolate the equipment, set the master switch to "0";
• in the event of a malfunction follow the advice given in this manual; if in
doubt, stop the equipment, disconnect the power cord, and contact an
Authorised Support Centre immediately;
• do not open equipment compartments containing electric parts;
• before carrying out any cleaning, routine and/or extraordinary
maintenance, make sure that the equipment has been unplugged from
the mains power supply;
• do not replace the power supply cable or tamper with the supplied plug;
to replace the same due to damage or wear, only contact the Authorised
After-Sales Centre;
• always make sure that there are no foreign bodies in the work area
(centrifuge compartment and door) to prevent damage and/or injuries;
• do not use petrol or flammable solvents as detergents; use only non-
flammable, non-corrosive and non-toxic substances. (see par. 8.1).
• WARNING: to prevent the risk of an electrical shock, connect
the equipment solely to power supply networks with earthing.
• Zhermack cannot be held responsible for any damage to the
equipment owing to incorrect maintenance performed by
unskilled staff or maintenance that does not comply with that
stated in this manual.
• As of this moment Zhermack is relieved from any injury/
damage to persons/objects that should occur following any
different use and use not declared in this manual.
In the event of a fire - no matter how small - inside the
equipment or nearby, only use powder extinguishers. Do not
use water.
hurrimix
2
mixer, such
2
The reference figures are present on pages 3, 4, 5 and 6 of this manual and in the product Quick Guide.
ChAPTER 3: DESCRIPTION OF ThE EqUIPMENT
3.1 GENERAL DESCRIPTION OF ThE EqUIPMENT
The device described in this manual is the Hurrimix
mixing automatically alginates and plasters for dental use.
It must be used in dental practices with the warning to keep it at least 1.5 m
away from the patient on any side.
3.2 DESCRIPTION OF ThE COMPONENTS - Fig. A
1. Lid
2. Centrifugal compartment
3. Digital display
4. Main switch 0/I
5. Protection fuses (2 x 230V or 2 x 115V)
6. Main power socket
7. ON/OFF - open lid button
8. Program button (8a, 8b)
9. Button "+" mixing time
10. Button "-" mixing time
11. START/STOP button
12. Main power cable (230V or 115V)
3.3 IDENTIFICATION DATA - Fig. B
The equipment described in this manual has a plate giving identification
data of the same and the Manufacturer:
A Name and address of the Manufacturer
B Equipment code and model
C Serial number
D Power supply information
The equipment has been built in compliance with the EEC Directives stated
in the attached "CE Declaration of Conformity. Use the identification data to
request spare parts, information and After-Sales Assistance from authorised
centres. If the plate should deteriorate with use and become illegible, even
partially, request a replacement from the Manufacturer stating all data.
Do not remove and/or ruin the plate so that the equipment
identification data can be recognised at all times.
ChAPTER 4: TEChNICAL FEATURES
4.1 TEChNICAL FEATURES AND FUNCTIONING PRINCIPLE
Zhermack creates qualitatively and technologically advanced work
instruments, in away that the user feels that they are made-to-measure his
everyday working requirements.
Zhermack uses state-of-the-art instruments in the design field when
making these products, thus ensuring maximum equipment functionality.
The use of top quality materials and performance of all inspections
necessary for operator safety guarantee Zhermack products, making them
competitive at a worldwide level.
The operating principle that characterises Hurrimix
mixing alginates and plasters for the dental industry. The device offers the
following advantages:
• consistent mixing quantity;
• even mixture;
• mixing time is significantly reduced compared to manual mixing;
• software with 20 mixing programs (that can be customised by the user):
10 programs for alginate and 10 for plasters, some of them are preset to
be used with Zhermack products;
• programming and mixing are easy to manage, thanks to the large digital
display.
4.2 TEChNICAL DATA
Technical data relative to the Hurrimix 2
Power voltage
Absorbed power
Duty cycle
Protection fuses (x2 - 5x20)
Protection rating IP
Noise level
Overvoltage category
Applicable pollution degree
mixer, designed for
2
mixer is based on the
2
mixer:
230 V ~ ± 10% 50/60Hz
(or 115 V ~ ± 10% 50/60Hz)
550 VA (230 V) | 550 VA (115 V)
T max 20''
ON
T min 3'
OFF
model 230 Vac: T 6,3A H 250V
model 115 Vac: T 10A H 250V
IP20
<80 dB
II
2
21
EN