Philips TT3003 Manual Del Usuario página 39

Problem
I have switched
on the appliance
but I cannot
increase or
decrease the light
intensity.
The 'ready to
flash' light does
not go on when
I place the
appliance on the
skin.
Cause
The appliance has
to be reset.
You have not
put the body
attachment with
safety ring properly
on the skin.
The safety ring is
dirty.
English
Solution
To reset the appliance,
switch off the appliance
and then switch it on
again. If you still cannot
adjust the light intensity,
contact the Consumer Care
Centre in your country,
your Philips dealer or a
Philips service centre.
Place the appliance at a
90° angle onto the skin in
such a way that all contact
switches touch the skin.
Then check if the 'ready to
flash' light is on and press
the flash button.
If this does not work,
place the appliance on a
part of your body where
it is easy to establish full
skin contact, for example
on your lower arm.Then
check if the 'ready to flash'
light works. If the 'ready
to flash' light still does not
go on when you place
the appliance on the skin,
contact the Consumer Care
Centre in your country,
your Philips dealer or a
Philips service centre.
Clean the safety ring
carefully. If you are unable
to clean the safety ring
properly, contact the
Consumer Care Centre in
your country, your Philips
dealer or a Philips service
centre to replace the flash
screen.
39