Wh2000I - Westinghouse WH1000i Manual Del Propietário

OPERATION
6. Add the 100 ml of oil to the engine. The oil should
now be at the correct level
Figure 14 – Engine Oil Correct Level
7. Do not overfill. If oil level is too high, oil will drain out
through the fill plug.

WH2000i

1. Loosen the screw and remove the engine oil fill/
drain plug service panel to access the oil fill/drain
plug (see Figure 15).
Figure 15 – WH2000i Engine Service Panel
22
(see Figure 14).
2. Clean the area around the oil fill/drain plug and
remove plug (see Figure 16).
Figure 16 – Oil Fill/Drain Plug (WH1000i Shown)
3. Using the supplied oil fill container and oil, fill the
container to the 2.0 mark on the container. Do not
overfill (see Figure 17).
2.0
1.5
1.0
0.5
Figure 17 – Oil Fill Container
NOTICE
Do not tilt the inverter to add oil. It must be filled on a
flat, level surface.