Controls - ESAB LHI 825 Manual Del Usuario Y Repuestos

5.2

Controls

1) ON/OFF switch: Allows the operator to turn the machine on and off.
2) Negative outlet terminal: to connect the work clamp.
3) Positive outlet terminal: To connect the electrode holder.
4) Potentiometer: Sets the welding current .
5) Local remote switch: selects the comand through the panel potentiometer on the machine or
through the remote control.
6) Socket: to connect the remote control.
7) Digital instrument: maintain the voltage and current values after the welding is over (optional).
8) Temperature pilot lamp: When the lamp shows that the equipment is overheated. The
welding is stopped and the cooler continues to work. At reaching the normal working
temperature the lamp turns off and the welding can be re-started.
9) Input cable
6
2
7
4
8
- 29 -
5
1
3