Master MH-40-GFA Manual De Operacións página 7

Idiomas disponibles

Idiomas disponibles

WARNING
– Turn heater gas valve knob and LP cylinder
valve to OFF position.
– LP cylinder valve equipped with old style
propane gas supplier.
– Some LP cylinders have a bleed-OFF valve.
This valve should be inspected for leaks after
clockwise to close.
– Fasten full propane tank and connect
COUNTER-CLOCKWISE.
Supply Valve
Regulator
Hose
Figure 3
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING,
CONNECTED TO A POWER SOURCE, OR WHILE
CONNECTED TO A FUEL SOURCE
Propane Tank
– With heater gas valve knob still in OFF
position turn ON the LP cylinder valve and
check for leaks with soap solution.
– To check for leaks, make up a 50/50 solution
of dish soap and water. Apply this solution
to all gas connections. If bubbles appear,
there is a leak. If a leak is found, turn off
the gas supply, and re-connect the leaking
connection. If the leak persists after several
tries, contact Pinnacle Customer Service at
(800)-641-6996.
– The installation of this heater must meet all
local codes and/or gas utility requirements. In
the absence of local codes, the National Fuel
Code ANSI Z223.1 should be followed.
– The minimum clearances to any combustible
construction materials must be maintained at
all times (See Page 2).
– Inspect the heater before each use, and at
Figure 4
Propane Forced Air Heater User's Manual
6
Inlet
Connector
Hose
loading

Este manual también es adecuado para:

Mh-60v-gfa-aMh-125v-gfa-aMh-150v-gfa-a