Installation Inside Mount; Important - Levolor Fabric Guia De Instalacion

INSTALLATION
INSIDE MOUNT (IM)
STEP 1: MARKING THE BRACKET LOCATIONS
IMPORTANT: Before marking bracket locations, ensure
that your bracket placement will not interfere with
any components inside the headrail.
•
Verify that your window casing has
a minimum depth of 1
allows for a partially recessed
headrail mount.
•
If flush mount (fully recessed
mount) is desired, a minimum
mounting depth of 2
is required.
•
Place brackets at either end
of inside mount frame.
•
Mark screw location for each
end bracket.
STEP 2: INSTALLING THE BRACKETS
•
Pre-drill screw holes.
— If installing brackets into wood,
use supplied screws.
— If installing into drywall, use
anchors in combination
with supplied screws.
•
Screw in brackets at marked
locations.
•
Ensure all brackets are square
with each other.
•
Slide bracket end cap over
bracket on left side to prepare for shade installation.
CAUTION: Be sure the brackets are properly engaged before
!
operating the shade. Failure to do so may result in the shade
falling and possible injury.
6
Motorized Lift Control–Open Roll
⁄ " which
1
2
⁄ "
1
2
Bracket
Bracket
Screw
Screw
Bracket
Bracket