Tabla de contenido
Idiomas disponibles
Idiomas disponibles
■
Do not use saw blades with a body thickness greater or
a width of tooth smaller than the thickness of the riving
knife.
■
Make sure the blade rotates in the correct direction and
the teeth are pointing to the front of the saw bench.
■
Make sure all clamp handles are tight before starting
any operation.
■
Ensure the arm is securely fixed when sawing. Only use
the machine when the saw bench table is in horizontal
position.
■
Disconnect the saw from the mains supply before
changing blades or carrying out maintenance.
■
Keep your hands out of the path of the saw blade.
■
Do not reach around behind the saw blade.
■
Do not stand on top of the unit.
■
During transportation, make sure the upper part of the
saw blade is covered.
■
Do not use the upper guard for handling or
transportation.
■
Do not use the saw for cutting any material other than
wood.
■
Slotting, rebating or grooving is not allowed.
ADDITIONAL SAFETY RULES FOR MITRE SAW MODE
■
Ensure the upper portion of the saw blade is completely
enclosed. Never remove the upper blade guard when
using the machine in mitre saw mode.
■
Never cut workpieces shorter than 160 mm.
■
Always clamp the workpiece safely.
RESIDUAL RISKS
In spite of the application of relevant safety regulations and
the implementation of safety devices, certain residual risks
cannot be avoided, such as:
■
Impairment of hearing.
■
Risk of accidents caused by uncovered parts of the
rotating saw blade.
■
Risk of injury when changing the blade.
■
Risk of squeezing fingers when opening the guards.
■
Health hazards caused by breathing dust developed
when sawing wood.
■
Risk of injury caused by parts of the workpiece hurled
at bystanders.
■
Risk of accidents caused by flying metal particles when
cutting into the fence.
■
Fire hazard due to extreme dust concentration when
not cleaned regularly.
■
Risk of uncontrolled situations when used in ambient
temperatures below -10 °C or above +45 °C.
INTENDED USE
This machine is designed to rip and cross cut wood
exclusively up to maximum thickness of 80 mm.
For correct operation it must be fixed and operated as
explained in this manual.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and
packaging
environmental-friendly recycling.
SYMBOL
Safety alert
CE Conformity
GOST-R Conformity
Class II, double insulated
Please read the instructions carefully before
starting the product.
Wear ear protection
Always wear eye protection.
DANGER! Sharp blade.
Width of cut
Blade teeth
Wood
English
should
be
sorted
for
3
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
Tabla de contenido
