Setting Oven Controls - Kenmore 790.3690 Serie Manual De Uso

setting Oven Controls

The ClOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time
of day operation. The clock has been preset at the factory for the 12 hour operation. When
the range is first plugged in, or when the power supply to the range has been interrupted,
the timer in the display will flash.
insTRUCTiOns
To set the clock (example below for 1:30)
1. Press . "ClO" will appear in the display (Figure 2).
2. Press pads to set the time of day to 1:30 (Figure
3). "ClO" will stay in the display. Press
disappear and the clock will start (Figure 4).
Changing between 12 or 24 hour time of day display
1. Press and hold
display. "12h" (Figure 5) or "24h" (Figure 6) appears in the
display and the control beeps once.
2. Press to switch between the 12 and 24 hour time of day
display. The display will show either "12h" (Figure 5) or "24h"
(Figure 6).
3. Press to accept the change or press
change.
4. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
. "ClO" will
for 7 seconds. "ClO" will appear in the
to reject the
13
TIMED DELAY
DOOR LOCKED
PRess
TIMED DELAY
DOOR LOCKED
TIMED DELAY
DOOR LOCKED
for 7 seconds
TIMED DELAY
DOOR LOCKED
or
TIMER CONV BAKE BROIL
CLEAN ROAST WARM PROBE
Figure 1
DisPlAY
TIMER CONV BAKE BROIL
CLEAN ROAST WARM PROBE
Figure 2
TIMER CONV BAKE BROIL
CLEAN ROAST WARM PROBE
Figure 3
TIMER CONV BAKE BROIL
CLEAN ROAST WARM PROBE
Figure 4
Figure 5
Figure 6