Operation - EGO Power+ LB4800 Manual De Funcionamiento

operation

WARNING:
Do not allow familiarity with this product to make you careless.
remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
always wear eye protection with side shields marked to comply with
anSi Z87.1, along with hearing protection. Failure to do so could result in objects being
thrown into your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not recommended by the
manufacturer of this product. the use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts, such
as screws, nuts, bolts, caps,etc. tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
appLICaTION
You may use this product for the purposes listed below:
 Clearing hard surfaces such as driveways and walkways
 Keeping decks and driveways free from leaves and pine needles
16
56V litHium-iOn COrDleSS BlOWer — lB4800
TO INSTaLL/REMOVE BaTTERy paCK (fig. 5)
CHaRgE BEfORE fIRST USE.
WARNING:
always remove battery pack from the product when you are
assembling parts, making adjustments, cleaning, or when not in use. removing battery
pack will prevent accidental starting that could cause serious personal injury.
TO INSTaLL
 align the ribs of the battery pack with the mounting slots in the blower's battery
port.
 press the battery pack down until it snaps into position.
TO REMOVE
WARNING:
always take care of your feet, children, or pets around you when
pressing the battery release button. Serious injury could result if the battery pack falls.
neVer remove the battery pack when in a high location.
 press the battery-release button; the battery pack will disengage from the latch
and the ejection mechanism will assist with removal.
 remove the battery pack from the blower.
5
56V litHium-iOn COrDleSS BlOWer — lB4800
Battery release Button
mounting Slot
17