Transport; Assembling Instructions; Assembling The Accessories Of The Cutiing Head; Assembling The Wheel Onto The Frame - Sima MAGNUM 700 Manual De Instrucciones

2.2 TRANSPORT

The machine is packed in the factory on a pallet, easy to lift with forklifts or hand pallet trucks. Due to its
dimensions and weight (See the technical features table in this manual), it is possible to transport it in light vehicles.
When it is necessary to move the machine within the workplace once it has been unpacked, it is
recommended to empty the water from the tray before moving the machine to avoid possible splatter.
It is also necessary to block the cutting head through its device (P Fig.5) to avoid any incidental gliding that
may damage it or damage other elements.
To block the longitudinal movement, you need fix the elements B and C Fig. 1 of the frame.
To block the vertical movement, you need to tighten the lever D Fig. 5
Make also sure the screws fixing the legs to the tray are perfectly tight to avoid them to fall off when lifting the
machine A Fig. 1

3. ASSEMBLING INSTRUCTIONS

The MAGNUM models are delivered in individual packing, containing in its interior the necessary accessories
for its correct mounting:
• 1 Ruler graduated in semicircles for the cutting cart
• 1 bag containing screws nuts and rings
• 1 5mm Allen spanner
• 1 46mm plane spanner
• 1 41 mm plane spanner
• 4 wheels, 2 of which with breaks
• 1 grip for the cutting head wheel
•

3.1 ASSEMBLING THE ACCESSORIES OF THE CUTIING HEAD

The cutting head wheel V, Fig.2 is assembled in the factory without a lever M, Fig.2 to save some room and
avoid strokes during transport. T assemble this lever, all you need is screw it onto the Wheel with the 5mm Allen
spanner A, Fig.2

3.2 ASSEMBLING THE WHEEL ONTO THE FRAME

It is necessary to raise the machine and place the wheels with their corresponding screws.
Screw the two fix wheels into the ends of the rear part of the machine Fig. 1 and screw the two wheels with
brakes into the opposite ends; as such, they will be within reach of the operator Fig. 1. Once the wheels have been
assembled, the machine can be easily moved.
-7-
ENGLISH