Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.2 TRANSPORT
The machine is packed in the factory on a pallet, easy to lift with forklifts or hand pallet
trucks. Due to its dimensions and weight (See the technical features table in this manual), it is possible
to transport it in light vehicles.
When it is needed to transport the machine for too long distances by vehicles, cranes or other
means of elevation, the latter should be safe.
By lifting the machine with cranes or hoists, normalised slings must be used. These are chosen en
function of the required work load limit, the way of use and the nature of the load. The choice is correct if
special norms of use are respected.
ATTENTION: To avoid any possible danger, stay away from elevated loads and be careful with their
possible displacement during transport, whether during lifting or mooring. Therefore, it is essential to
choose the correct slings and remain particularly vigilant in sensitive operations (elevation, coupling,
mooring or discharging).
CAUTION: During transportation of the machine is never to be reversed nor support on either side,
must be supported by its base.
3. ASSEMBLING INSTRUCTIONS
When you open the package you will find the body of the machine with the handle removed, an
instruction manual and warranty. Petrol engine versions will also include an instruction manual of the
engine itself.
HALCON60 model are delivery with a set of blades and float disc.
To mount the machine will be deployed the handlebar and put it in working position blocking the
mechanism of rotation of the handlebar itself.
To mount the float disc will need to put this on a flat surface and place the machine with finishing blades
mounted on the float blades, trying to place the four arms of the machine between the spaces between
the elements incorporated on the float disc, once achieved this position will only be necessary to put the
machine up and when the arms start moving automatically the disc will stay in proper position.
3.1MACHINES WITH PETROL ENGINE.
HALCON models are supplied with engine oil and without fuel.
Manual must be read of the engine itself.
Avoid fuel linking on the machine filling the tank due can be dangerous or affects some element of it.
Before starting the engine check the oil level in the crankcase by placing the machine on a flat surface
and the engine stopped, if necessary, fill to complete the level with the type of oil recommended by the
engine manufacturer.
3.2 MONOPHASE ELECTRIC MOTOR
These models are supplied with one-phase 230 electric motor with switch sockets. The extension cord
used must have a minimum area from 4x2, 5 mm
2
be 4x4 mm
. At one end is placed the extender or air base that includes the machine in endowment, and
the other an air jack which is compatible with the output of the switchboard where you go to plug.
The single-phase electric motor models are set in factory to work at 230 V.
2
up to 25 meters length. For a greater distance it will
Capítulos
Tabla de contenido
