Husqvarna 129RJ Manual De Instrucciones página 593

• If the blade is angled to the left when clearing
grass, the grass will collect in a line, which
makes it easier to collect, e.g. by raking.
• Try to work rhythmically. Стійте впевнено,
розставивши ноги. Після зворотного руху
пройдіть вперед і знову займіть стійке
положення.
• Let the support cup rest lightly against the
ground. Вона запобігає удару ножа об
землю.
• Reduce the risk of material wrapping around
the blade by following these instructions:
• Always work at full throttle.
• Під час зворотного руху не проводьте
ножем по вже зрізаній траві.
• Stop the engine, unclip the harness and place
the machine on the ground before you start to
collect the cut material.
Grass trimming with a trimmer head
Підстригання
• Hold the trimmer head just above the ground at
an angle. It is the end of the trimmer line that
does the work. Let the trimmer line work at its
own pace. Never press the trimmer line into the
area to be cut.
• The trimmer line can easily remove grass and
weeds up against walls, fences, trees and
borders; however it can also damage sensitive
bark on trees and bushes, and damage fence
posts.
• Reduce the risk of damaging plants by
shortening the trimmer line to 10-12 cm (4-4,75
in) and reducing the engine speed.
• When trimming you should use less than full
throttle so that the trimmer line lasts longer and
to reduce the wear on the trimmer head.
Clearing
• The clearing technique removes all unwanted
vegetation. Тримайте тримерну головку над
самою землею та нахиліть її. Let the end of
the trimmer line strike the ground around trees,
posts, statues and the like. ВАЖЛИВО! This
technique increases the wear on the trimmer
line.
РОБОЧІ ТЕХНОЛОГІЇ
• The trimmer line wears quicker and must be fed
• The trimmer is ideal for cutting grass that is
• Do not allow the trimmer head to constantly
• The fan effect of the rotating line can be used
• When cutting and sweeping you should use full
forward more often when working against
stones, brick, concrete, metal fences, etc., than
when coming into contact with trees and
wooden fences.
Cutting
difficult to reach using a normal lawn mower.
Keep the trimmer line parallel to the ground
when cutting. Намагайтеся не притискати
тримерну головку до землі, бо це може
пошкодити як інструмент, так і газон.<:/fc>
come into contact with the ground during
normal cutting. Такий постійний контакт
головки з землею може привести до її
пошкодження та зношення.
Замітання
for quick and easy clearing up. Hold the
trimmer line parallel to and above the area to
be swept and move the tool back and forth.
throttle to obtain the best results.
УВАГА! Neither the operator of the
machine nor anyone else may attempt to
remove the cut material while the engine
is running or the trimmer line is rotating,
as this can result in serious injury. Stop
the engine and trimmer head and
disconnect lead from spark plug before
you remove material that has wound
around the drive shaft as otherwise there
is a risk of injury. Зубчаста передача
може нагрітися і залишатися гарячою
протягом деякого часу. Allow time to
cool. You could get burned if you touch it.