Technical Data; Noise/Vibration Information; Declaration Of Conformity - Berner BID-S-1 Manual Original

OBJ_BUCH-1318-001.book Page 13 Tuesday, September 28, 2010 1:56 PM
4 Lock-on button for On/Off switch
5 Insulated handle
6 On/Off switch
7 Thumbwheel for speed preselection
8 Gear selector
9 Button for depth stop adjustment
10 Insulated auxiliary handle*
11 Depth stop*
12 Chuck key*
13 Key type drill chuck*
14 Screwdriver bit*
15 Universal bit holder*
16 Allen key **
* The accessories illustrated or described are not
included as standard delivery.
**Commercially available (not included in the delivery
scope)

Technical Data

Impact Drill
Rated power input
Output power
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Impact frequency at no-load
Rated torque (1st/2nd gear)
Speed preselection
Right/left rotation
Keyless drill chuck
Fully automatic spindle lock-
ing (Auto-lock)
Safety Clutch
Spindle collar dia.
Maximum drilling diameter
(1st/2nd gear)
– Concrete
– Brickwork
– Steel
– Wood
Chuck clamping range
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries, these
values can vary.
2 609 932 784 • 28.9.10

Noise/Vibration Information

Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 95 dB(A); Sound power
level 106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling
a =5.6 m/s
h
Impact drilling into concrete: Vibration emission value
a =14.6 m/s
h
Screwdriving without impact: Vibration emission value
a <2.5 m/s
h
Tapping: Vibration emission value a
Uncertainty K =1.5 m/s
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
BID - S - 1
The declared vibration emission level represents the
W 1100
main applications of the tool. However if the tool is
W 630
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
-1
min 0 – 900
differ. This may significantly increase the exposure
-1
min 0 – 3000
level over the total working period.
An estimation of the level of exposure to vibration
-1
min 580
should also take into account the times when the tool
-1
min 1900
is switched off or when it is running but not actually
-1
min 51000
doing the job. This may significantly reduce the expo-
Nm 9.6/3.2
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.

Declaration of Conformity

mm 43
We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardization
mm 22/13
documents: EN 60745 according to the provisions of
mm 24/16
the directives 2004/108/EC, 2006/42/EC.
mm 16/8
mm 40/25
Technical file at:
mm 1.5 – 13 Berner AG, Bernerstraße 6, D-74653 Künzelsau
Jörn Werner
kg 2.9
CEO
/ II
24.08.2010, Berner AG; Bernerstraße 6;
D-74653 Künzelsau
into metal: Vibration emission
2 2
, Uncertainty K =1.5 m/s
2
, Uncertainty K =1.8 m/s
2 2
, Uncertainty K =1.5 m/s
2
.
Ulrich Lindner
COO
value
,
2
,
,
2
<2.5 m/s ,
h
English | 13