Precautions, Restrictions And Warnings; Transport Conditions, Warehousing And Operation; Sensitiveness To Environmental Conditions Foreseeable In Normal Situations Of Use - GNATUS ENDUS DUO Manual Del Propietário

EQUIPMENT OPERATION
the measurement cycle. It can be exchanged for one or another more adequate during
the root canal treatment or when another canal is measured. In these cases the equipment
automatically detects that a new measurement has been initiated.
THE LENGTH OF WORK ON THE CANAL VARIES FROM CASE TO CASE
DUE TO DIFFERENT FORMS OF THE TEETH AND CANALS OF THE DENTAL
ROOTS;
AFTER THE LENGTH OF WORK HAS BEEN DEFINED TURN OFF THE
EQUIPMENT AND DISCONNECT ALL CABLES.
AFTER COUPLING THE COUNTER-ANGLE TO THE MICROMOTOR, LIGHTLY
PULL IT TO CONFIRM THAT IT IS CORRECTLY FASTENED.
WHEN THE EQUIPMENT IS CONNECTED TO THE CHARGER, IT WILL TURN
OFF AUTOMATICALLY (NON-OPERATING) AND THE BEEP WILL SOUND
3 TIMES INDICATING THAT THE CONNECTION IS CORRECT.
AUTOMATIC TURN OFF: THE EQUIPMENT WILL TURN OFF AUTOMATICALLY
WHEN IT IS NOT IN USE FOR MORE THAN 3 MINUTES.

PRECAUTIONS, RESTRICTIONS AND WARNINGS

Transport conditions, warehousing and operation

The equipment must be transported and stored with the following observations:
- Carefully, to not suffer falls and neither receive impacts.
- Protected from moist, do not expose to rain, water splashes or moist floor.
- Keep in a protected place from the rain and direct sun and its original package.
- When transporting, do not move it in irregular surfaces and protect the package from
the direct rain and respect the maximum piling informed at the external part of the package.
- Room temperature range for transport or warehousing -12ºC to +50ºC.
- Room temperature range recommended by Gnatus +10ºC to +35ºC.
The equipment keeps its safety condition and efficiency, since kept (stored) as
mentioned in this operation instruction. That way, the equipment will not lose or
change its physical and dimensional characteristics.
Sensitivity to predictable environmental conditions in ordinary
situations of use
- The equipment has been designed not to be sensible to interferences as magnetic
fields, external electrical influences, electrostatic discharges, the pressure or the variation
of pressure, since the equipment is installed and kept clean, conserved, transported and
operated conforming this operation instruction.
60