Maintenance; Recommendations For The Dental Equipment Maintenance; Precautions; Replacing The Fuse - GNATUS Amalga Mix II Manual Del Propietário

MAintenAnce

Recommendations for the dental equipment maintenance

Your Gnatus equipment has been designed and developed according to the standards of modern
techology. Similarly to other kinds of equipment, it requires special care, which is many times neglected
due to several reasons and circunstances.
Therefore, here are some important reminders for your daily routine. Try to follow these simple rules,
which will save you a lot of time and will avoid unnecessary expenses once they start making part of
your working procedure.

Precautions

- Certify the correct voltage when you switch on your apparatus at the electricity.
- Install your apparatus on aproper place protected by solar rays and humidity.
- Whenever off duty turn off the main switch.

Replacing the fuse

With the aid of a screw-driver, loosen the fuse
holder cover (13) and then replace the Fuse (14)
to the spare fuse (15).
Note: The spare fuse (15) comes with the
equipment, after making the first change it is
advisable that there always be a spare fuse (1A).

cleaning the equipment

To clean the equipment, we recommend the use of "BactSpray (Reg nº MS:
3.2079.0041.001-5) or any other similar product:
Active component: Benzalkonium chloride (tri-quaternary ammonium)
Chemical composition: Butyl Glycol, Decyl polyglucose, Sodium Benzoate, Sodium
Nitrate, Essence, Deodorized Propane / Butane, demineralized Water.
For more information concerning cleaning procedures, see manufacturer's instructions.
WARNING:
• In order to prevent risks and damages to equipment, make sure that the liquid does
not enter into the unit.
• The application of other solvent-based cleaning products or sodium hypochloride
isn't recommended, because they may damage the equipment.
Solution 50%................................................. 0.329%
18
14
15
13