Fuels, Coolants And Lubricants - Jungheinrich EKS 314 Manual De Instrucciones

5.1

Fuels, coolants and lubricants

Handling lubricants: Lubricants must always be handled properly as per manufac-
turer's instructions.
Qw W
Improper handling is injurious to health, life, and environment. Lubricants
must be stored in adequate containers only. They might be inflammable and,
therefore, must not come into contact with hot components or open fire.
When filling in lubricants use clean containers only. It is prohibited to mix lubricants
of different grades or qualities, except if mixing is expressively prescribed in these op-
erating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of lubricants and binding agent is to be disposed of according
to the regulations.
Code Order no.
51037497
51037494
A
51085361*
B 50022968
14038650
E
29201430
G 29201280
H 50157382
* Plus 2% additive 68 ID (order no. 50307735)
QwD
The vehicles are delivered from the factory with "HLP D22" hydraulic fluid or
with "Plantohyd 22 S + 2 % additive 68 ID" biodegradable hydraulic fluid.
An oil change from "Plantohyd 22 S" biodegradable hydraulic fluid to "HLP
D22" hydraulic fluid is not permitted. The same applies to an oil change
from"HLP D22" hydraulic fluid to "Plantohyd 22 S" biodegradable hydraulic
fluid.
Furthermore, operation with a mixture of "HLP D22" hydraulic fluid and
"Plantohyd 22 S" biodegradable hydraulic fluid is not permitted.
Quantity Capacity
1,32 gal
(5 l)
0,26 gal
approx.
(1 l)
8.72 gal
(33 l)
1,32 gal
(5 l)
1.32 gal 0.66 gal
(5 l) (2.5 l)
0.9 lbs
(400 g)
cartridge
---
2.2 lbs
(1 kg)
2.2 lbs
---
(400 ml)
2.2 lbs 0.9 lbs
(1 kg) (400 g)
Description
HLP D22 including 2%
additive share 68 ID
Plantohyd 22 S
(biodegradable
hydraulic fluid)
SAE 80 EP API GL4
Lithium grease
KP2K-30
Chain spray
Tunfluid LT 220
Lithium grease
K3K-20
Used for
Hydraulic system
Transmission
General
Mast track,
Lift chains
Front wheel bearings
G 11