Jungheinrich EKS 314 Manual De Instrucciones página 45

3.4.1 Rail guidance truck
Rail guidance trucks are equipped with sensors which
activate aisle recognition when they enter the racking
lanes.
– Approach the aisle at reduced speed so that the truck
is aligned with the narrow aisle and is within the demar-
cation.
NOTICE Observe the notices attached along the route.
– Slowly enter the narrow aisle.
Ensure that the truck guide rollers enter the narrow aisle guidance rails.
– Press the "guidance on" (32) switch.
– The "guidance on" display light (38) changes to active mode.
– The drive wheel is automatically set forward. The steering angle display (13) shows
the steering angle permanently in the center position after alignment. Manual steer-
ing is disabled.
– The travel control button (1) is used to change travel speed and direction.
– Continue to travel along the narrow aisle at your required speed.
IMPORTANT Press the push button (32) to leave the rail
guidance. The display (38) changes to non-active
mode. The truck is now also free to move.
Qw W
You can only change from automatic to manual
steering once the truck has completely left the
narrow aisle.
E 16
13
32
13
32
38
38