www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
PROBLEM
The machine does not start
up when the key is turned.
The brush doesn't turn.
The suction unit does not
function.
The machine does dry prop-
erly, leaving traces of water
on the floor.
No water comes out.
TROUBLESHOOTING
CAUSE
Low battery.
Main fuse blown.
Defective key.
Movement set to neutral.
Engine trouble.
Faulty board.
Recovery tank full.
Defective turbine motor.
Faulty board.
Aspirator off.
Aspiration tube blocked.
Recovery tank full.
Squeegee
rubber
worn.
Tank empty.
Defective water pump.
Faulty board.
Filter clogged.
Pump solenoid valve not
functioning.
EN - 21
SOLUTION
Check that the battery is
charged.
Replace the fuse found on
the battery cable.
Change the key.
Engage forward or reverse
movement.
Replace engine.
Change the board.
Empty the tank.
Change the motor.
Change the board.
Start up the aspirator.
Check
and
clean the aspiration tube that
connects the squeegee to
the recovery tank.
Empty the recovery tank.
blades
Replace or turn over the
squeegee rubber blades.
Fill the tank.
Change the water pump.
Change the board.
Clean the filter.
Call technical assistance.
if
necessary