Troubleshooting - Ghibli & Wirbel ROUND 45 Manual Del Usuario

PROBLEM
Pressing the switch (34), the
machine will not turn on.
The brush does not rotate.
Aspirator does not work.
The machine does not dry
well, leaving traces of water
on the floor.

TROUBLESHOOTING

CAUSE
Circuit switch to position "0".
Switch failure.
Power cable disconnected.
Function card damaged.
Brush motor damaged.
Switch failure.
Brush rotation
switch not pressed.
Function card damaged.
Intake motor damaged.
Switch failure.
Suction unit switch
pressed.
Recovery tank full.
Aspirator off.
Switch failure.
Aspiration tube blocked.
Dirty wiper.
Recovery tank full.
Dirty water filter clogged.
Squeegee rubber
worn.
ENGLISH - 12
Professional Cleaning Machines Since 1968
SOLUTION
Press the power switch.
Replace the switch.
Connect the cable.
Replace.
Replace.
Replace the switch.
enabling Press the switch.
Replace.
Replace.
Replace the switch.
not Press the switch.
Drain, flush and clean the
tank.
Start up the aspirator.
Replace the switch.
Check and if necessary
clean the aspiration tube
that connects the squeegee
to the recovery tank.
Clean the wiper.
Empty the recovery tank.
Clean the filter.
blades Replace or turn over the
squeegee rubber blades.
www.ghibliwirbel.com