Ghibli & Wirbel R 150 FD 85 Instrucciones De Uso página 52

PROBLEM
The machine does not move
in working conditions.
Insufficient floor cleaning.
The empty solution tank indi-
cator " " keeps flashing.
Abbreviations:
BATT .................................................Battery
CN1 .......... 6 pole Display - Board connector
CN2 ...........20 pole Electric board connector
CN3 ........................................12 pole Board
CN4 .......... 4 pole Board - Display connector
CN6 ............................... Batteries connector
CH .............................................. Ignition key
E.V. ..............................................Eletrovalve
F1 ................................................. 150A fuse
F2 ..................................10A rearmable fuse
FLUS ............................................Flowmeter
MA .......................................... Suction motor
MS1 ........................................Brush motor 1
MS2 ........................................Brush motor 2
MT ......................................... Traction motor
PA..............................................Water pump
PC........................................ Chemical pump
PT ...........................................Potentiometer
S1 ................... Recovery level Touch sensor
TR ..................................................Contactor
CAUSE
Operator not properly seated
in the driver's seat.
Defective monowheel.
Movement direction not en-
gaged.
Faulty board.
Operator presence sensor
malfunction.
Unsuitable brushes or deter-
gent.
Brush worn.
Empty tank.
Tap closed.
Faulty flowmeter.
1.........................................................Display
2....................................................Power ON
3.........................Forward - backward motion
4............................................................ Back
5.............................................................Next
6....................................................Micro seat
7....................................Micro steering angle
8..........................................Level Touch Cell
9.......................................... Processor 36/12
10....................................... Brushes actuator
11...........................................Wiper actuator
12..................................................Flowmeter
13...........................................................Horn
14................................................. Headlights
15..................................... Potentiometer 47k
16........................................... Flashing lights
17...................................... Accelerator pedal
EN - 22
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
SOLUTION
Sit properly in the driver's
seat.
Monowheel replacement.
Use the appropriate control
to engage the desired move-
ment direction.
Change the board.
Call customer service to re-
quest replacement.
Use brushes or detergents
which are suitable for the
type of floor or dirt to be
cleaned.
Replace the brush.
Fill the tank.
Open the tap.
Replace the flowmeter.