Cleaning And Storage - Honeywell MILLER Turbo T-BAK Personal Fall Limiter Manual De Instrucciones Para El Usuario

7.2 Maintenance
Basic care of all fall protection equipment will prolong the durable life of the unit and will contribute
toward the performance of its vital safety function.
Servicing
Servicing of Miller self-retracting lifelines must only be carried out by Honeywell Safety Products
or persons or entities authorized in writing by Honeywell. A record log of all servicing and
inspection dates for this device must be maintained. Only original Miller replacement parts are
approved for use in this device. Repairable devices must be returned to our facilities or an
approved service center whenever subjected to fall arresting forces for physical inspection and
manner to prevent inadvertent further use. Contact your Honeywell distributor or call Honeywell
Technical Services at 1-800-873-5242 for a return authorization number.
returned to the manufacturer or an approved service agent no more than 2 years after the date of
manufacturer for inspection and maintenance and annually thereafter.]
Frequency is based on the type of use and conditions of use. Refer to Appendix A: Inspection

Cleaning and Storage

Periodically clean the exterior of the device and wipe the lanyard or lifeline using a damp cloth
and mild detergent. Towel dry. When not in use, store in a clean, dry location, free of exposure to
heat, light, excessive moisture, oil, chemicals, vapors, or other degrading elements. The lanyard
or lifeline should be fully retracted into the device when not in use.
Us er In stru ctio ns - Engli sh
15