Operation; Description Of The Front Of The Video Door Phone; Call Management; Video Switching - Urmet 1722/81 Manual De Instrucciones

10.

OPERATION

10.1. DESCRIPTION OF THE FRONT OF THE VIDEO DOOR PHONE

1. display
2. microphone
3.
ringer mute indication and active programming mode
4.
electric lock activation button - contextual OK button
5. OSD menu navigation buttons
6. garage gate door opener button
7.
mute button
8. OSD menu activation button, programming mode activation and programming confirmation button
9. auto-on button
10. button for resetting default settings
11.
speaker
12. audio on/off button - contextual X button (cancel)

10.2. CALL MANAGEMENT

The following events will occur when the calling button is pressed:
• The camera LEDs will light up.
• The name tag backlighting will go off for a time.
• The video door phones will emit the call tone.
• The video stream of the calling station camera will appear on the "Master" video door phone. The green
will light up.
• The green button and the red
The video door phone will return to stand-by conditions if no button is pressed within three minutes from the call.
The following operations can be performed after a call on the "Master" video door phone:
• Press to turn the audio on: after having turned audio on, the button will turn green and conversation with the caller is possible for up to
3 minutes (the conversation can be interrupted at any time by pressing
While the audio is on, the name tag backlighting LEDs of the call station will be turned off.
• Press to access the OSD menu (see paragraph 10.8).

10.3. VIDEO SWITCHING

The call tone will be generated in alternating manner by the various video door phones after a call if "Slave" video door phones (OP3) are present
in the system. The "Master" video door phone will enable monitor switch-on if the call is from a video calling station. In this case, during the call
pick-up time (3 minutes from the call), the video door phones of the other devices can be switched on by pressing the auto-on button
switching function) until one of the video door phones picks up.
The picture of the main camera will appear only on the device that picked up afterwards.
The camera picture will therefore be normally shown on only one apartment station at a time.

10.4. OPENING THE DOORS

During a call, during communication (audio on) or during auto-on it is possible to:
• activate the pedestrian gate electric lock by pressing
• activate the garage gate lock by pressing

10.5. AUTO POWER-ON

Press to see the video stream of the calling station camera on the video door phone.
Auto-on is silent (audio is not turned on) and the calling station LEDs will be off. During auto-on, the video stream of the camera will appear on
DS17-06A
1
12
11
10
9 8
button will light up on the "Slave" video door phones.
;
.
2
3
4
5
7 6
).
button and the red button
(video