flir C346ZC252 Manual De Instrucciones página 22

5 Switch Between HD Analog Video Formats
3. While the camera's current video format is flashing, press and
hold a video format button of your preference for 10 seconds.
The corresponding color of the video format you selected will
glow in the Enter button to indicate that the camera's video for-
mat has changed.
NOTE
Repeat the above steps each time you want to change the
camera's video format.
4. Disconnect the UTC controller and directly connect the extension
cable from the camera to a video input on your DVR.
When your camera is in SD (CVBS) video format, follow the steps be-
low to change the camera's video format:
1. Press the Enter button on the UTC controller once. The Enter
button flashes all four video format colors simultaneously.
2. Press and hold the Enter button until the LED indicators turn off.
After a few seconds, the Enter button will flash the camera's cur-
rent video format. In this case, it is the color red indicating the
camera is in SD (CVBS) video format.
3. Press and hold the CVI and Enter button together until the Enter
button stars flashing red.
4. While the Enter button is flashing red, press and hold a video for-
mat button (AHD / TVI / CVI) of your preference for 10 seconds.
The corresponding color of the video format you selected will
glow in the Enter button to indicate that the camera's video for-
mat has changed.
5. Disconnect the UTC controller and directly connect the extension
cable from the camera to a video input on your DVR.
#; r. 7.0/47030/47030; en-US 17