flir C346ZC252 Manual De Instrucciones página 14

4 Installation
4. Disassemble the mounting bolt sets (4x). Place the anchors (4x)
on the mounting bolts (4x) with the expandable side on the wide
end of the bolt. Insert the wide end of the mounting bolt assembly
into the wall and tap the bolts into the wall with a hammer.
1. Mounting Bolt (4x); 2. Anchor (4x)
5. Pull the connection cable(s) through the mounting surface and
wall mount.
6. Place the wall mount over the mounting bolts and attach the wall
mount to the wall by screwing a flat washer (4x), spring washer
(4x), and nut (4x) on each bolt.
1. Nut (4x); 2. Spring Washer (4x); 3. Flat Washer (4x); 4. Anchor
(4x); 5. Mounting Bolt (4x)
#; r. 7.0/47030/47030; en-US 9