Safety Precautions; Used Symbols - Circutor MH-10 Guia Del Usuario

• This equipment should be operated only by qualified and duly trained people, closely
observing the corresponding safety regulations and instructions contained in the present
User Guide.
• It should be checked that the item to be measured is voltage free.
Before starting with the measurements, be sure that the battery is well charged and that
•
the line voltage is between specified limits.
• Do not connect or disconnect the test leads during the measurement.
There are no adjustable parts or parts that can be replaced by the user within the
•
equipment. Taking out the Control Panel in order to have an access to the internal parts
may be dangerous as there are high voltages inside, capable of causing fatal accidents.
Cleaning of this instrument should be carried out using a soft cleaning anti-static liquid,
•
after verifying that it doesn't attack the plastic parts used in the case and in the Control
Panel of this equipment.
This equipment should be used only by a trained and competent person,
strictly applying suitable safety rules.

Used symbols

"
Caution, refer to User Guide.
#
Equipment complies with current EU Directives.
"

Safety Precautions

4