Safety Warnings; Used Symbols - Circutor MI-5500e Manual De Uso

Before to use this instrument the User guide and Safety warnings must be read

and understood.
Safety procedures and rules for working near high voltage energized systems

must be observed during the use of this equipment. The generated voltages may
be dangerous.
 Do not connect or disconnect the test leads during the measurement.
 Do not touch the acrylic cover of the galvanometer with the energized terminals.
This could cause a static charge that will affect all the measurements.
 Be careful not to make short-circuit between the high voltage terminals and the
"-R" or "Guard" terminals while a measurement is running, because it could be
dangerous for the operator.
Be sure that there are not any voltage difference between the points to which the

insulation tester will be connected to, neither between them and ground.
The panel, terminals and connectors of the equipment must stay dry and clean.

This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.

Used symbols

 Caution, risk of electric shock.
 Caution, refer to User Guide.
 Equipment complies with current EU Directives.


Safety warnings

22