Set Temperature Is Not Achieved While Using Hot Water; Customer Service; Warranty; Accessories And Spare Parts En - Kärcher HDS 3.5/23-4M Eg Manual De Instrucciones

Set temperature is not achieved
while using hot water
Working pressure/flow rate to high
–
 Reduce working pressure/flow quantity
at the pressure/volume regulator in the
pump unit.
Sooty heating spiral
–
 Have device de-sooted by customer
service.

Customer Service

If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.

Warranty

The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
Accessories and Spare Parts
Note: When connecting the appliance to a
chimney or if the device cannot be ac-
cessed visually, we recommend the instal-
lation of a flame monitor (option).
Only use accessories and spare parts
–
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
At the end of the operating instructions
–
you will find a selected list of spare parts
that are often required.
For additional information about spare
–
parts, please go to the Service section
at www.kaercher.com.
– 12
EN 19