Protecting Pictures; Erasing Pictures; Single-Frame Erase; All-Frame Erase - Olympus CAMEDIA C-8080 Manual Básico

basic_e_d4155_6.fm Page 39 Monday, December 8, 2003 10:02 AM

PROTECTING PICTURES

You are recommended to protect important pictures to avoid accidentally
erasing them. Protected pictures cannot be erased by the single-frame/all-frame
erase function.
1
Set the mode dial to q and turn the camera on.
• The monitor turns on.
2
Use the arrow pad or control dial to display the picture you want
to protect.
3
Press 0.
• To cancel protection, press 0 again.
• Protected pictures cannot be erased by the single-frame/all-frame
erase function, but they are all erased by formatting.
Note

ERASING PICTURES

This function lets you erase recorded pictures. Single-frame erase erases only
the picture displayed on the monitor and all-frame erase erases all the pictures
on the card.
• Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
Note

Single-frame erase

1
Set the mode dial to q and turn the camera on.
• The monitor turns on.
2
Use the arrow pad or control dial to display the picture you want
to erase.
3
Press S.
• The S ERASE screen is displayed.
4
Press ac to select YES, then press e.
• The picture is erased and the menu is closed.

All-frame erase

1
In the top menu, select MODE MENU → CARD → CARD SETUP,
and press d.
2
Press ac to select R ALL ERASE, then press e.
3
Press ac to select YES, then press e.
• All the pictures are erased.
En
En 39