Removing The Adapters; Removing And Mounting The 5-Point Belt System And The Cover; Removing And Mounting The 5-Point Belt System; Removing And Mounting The Cover - Kiddy Evostar Light 1 Manual De Instrucciones

EN
Make sure that your child is secured in the infant carrier as described
in its operating manual.
To remove an infant carrier firstly turn the handle according infant
carrier manual in carrying position (fig. 35).
Ensure that the handle hinge is engaged in carrying position. Now
the infant carrier can be removed from the adapters. Thereto lift up
the handle (fig. 36, no. 1) and push both release buttons at both sides
successively (fig. 36, no. 2 + 3).

7.3 Removing the adapters

Hold and push the removing button on each adapter pushed (fig. 33,
no. 1) and pull out both adapters (fig. 33, no. 2).

8. Removing and mounting the 5-point belt system

and the cover
8.1 Removing and mounting the 5-point belt system
Remove the back panel (fig. 14, no. 1).
Push the five plastic clips on the belt ends from rear through the
holes of the backrest (fig. 37, no. 1 + 2) and the seat (fig. 37, no. 3).
Mount the belts by pushing the five plastic clips through the holes.
Make sure that the clips lay flat (fig. 38, no. 1) on the rear of the back-
rest and the seat, that the belts are not twisted and that the belt sys-
tem is complete (fig. 39).

8.2 Removing and mounting the cover

Remove the sun canopy as described in section 4.5. Remove the
5-point belt system as described in section 8.1.
To remove the cover loose the loops at each side (fig. 40, no. 1–6).
Remove the cover then.
16