Attaching The Carrycot Hood; Attaching The Carrycot Apron; Adjusting The Carrycot Hood; Mounting The Adapters - Kiddy Evostar Light 1 Manual De Instrucciones

EN

6.2 Attaching the carrycot hood

Put on the hood to the handle frame and close both zippers (fig. 26).
Afterwards join together the velcro fasteners of sun canopy and
carrycot.
Removing the hood by follow the steps in reverse order.

6.3 Attaching the carrycot apron

Put on the apron to the carrycot and join together the velcro fasten-
ers (fig. 27).

6.4 Adjusting the carrycot hood

Depress the buttons on the side of the hood (fig. 28, no. 1) and pull up
until you hear it click into place (fig. 29, no. 1).
Depress the buttons again to put the hood down.

6.5 Mounting the adapters

Remove the seat unit as explained under 4.2. Insert both adapters
on the left and right support (fig. 30) on the chassis until it lock into
place. The adapters are marked L for left and R for right from the
perspective of standing behind the handle of the chassis.
Check by hand pulling test whether both adapters are locked securely.

6.6 Fitting the carrycot

Lower the carrycot onto the adapters parent facing, let the adapters
slide into the carrycot adapter ports and push down firmly until it clicks
and locks together (fig. 31).
WARNING
Ensure the carrycot is locked in place on the chassis
before use.
13