Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. REORDER INFORMATION, TECHNICAL DATA, WARRANTY TERMS
6.1 Accessories
Accessory
SmartLite Pro Battery Refill 1x
SmartLite Pro Sleeve Refill 100x
SmartLite Pro Shield Refill 5x
SmartLite Pro Power Connector Refill 1x
SmartLite Pro Transillumination Tip Refill 1x
SmartLite Pro PolyCure Tip Refill 1x
SmartLite Pro Cure Tip refill 1x
SmartLite Pro O-rings refill 3x
6.2 Serial number
The handpiece, battery packs, charging base and tips have different serial numbers .
The serial number (
) should be quoted in all correspondence which requires identification
of the product . XXXXX = 00001 through 99999 as marked on the component
Serial number format SmartLite Pro handpiece and complete kit
Serial number format SmartLite Pro charging base:
Serial number format SmartLite Pro Transillumination tip
Serial number format SmartLite Pro Cure tip:
Serial number format SmartLite Pro PolyCure tip:
6.3 Technical Specifications
AC supply connection:
110 V - 240 V / ~ 50 - 60 Hz
Charging Base
5V, 1A
Power input:
Operation:
Ambient temperature: Between 10 °C and +30 °C (50 °F and 86 °F)
Relative humidity: Between 20% and 90%
Storage:
Ambient temperature: Between 5 °C and +35 °C (41 °F and 95 °F)
Transport:
Ambient temperature: Between -10 °C and +50 °C (14 °F and 122 °F)
Battery performance:
• Battery is pre-charged however, charging is recommended prior to first
use.
• Time for battery recharge: Approximately 2 hours.
• 3.2V, 600 mAh
Battery over current/
Resettable fuse
temperature protection:
Light emitting diode:
Cure and PolyCure tip: Four 3 W LEDs
Average light intensity:
Cure Tip: Approximate irradiance 1200 mW/cm
PolyCure Tip: Approximate irradiance 1200 mW/cm
Output peak
Cure Tip: Between 450 nm and 480 nm
wavelength range:
(intensity maximum peak around 465 nm)
PolyCure Tip: Between 405 nm – 480 nm
(intensity maximum peaks around 420 and 465 nm)
Effective curing diameter of
10 mm
curing tips:
Transillumination Tip
Approximate power: 8-10 mW and 20-24 mW
Light temperature: 5000-6000K
18
Reorder no.
644401
644402
644403
644404
644405
644406
644407
644408
HXXXXX
CXXXXX
TXXXXX
BXXXXX
PXXXXX
2
2
Unit handpiece dimensions
Cure/PolyCure tip: Length: 10.5cm; Width: 1.5cm
(with battery & curing tip):
Transillumination tip: Length: 9.5cm; Width: 1.5cm
Unit weight:
Handpiece with battery pack: 120 grams
Charging base with power connector: 375 grams
Applied Parts
Probe tips, barrier sleeve
6.4 Classifications
Type of protection against electric shock
Degree of protection against electric shock
Mode of operation for handpiece
Settings for Handpiece
According to medical device directive:
Pollution Degree Classification
Overvoltage Category
6.5 Symbol Identification
Cure
Blue light curing tip
PolyCure
Multi-wavelength curing tip
Illuminate
Transillumination tip, full spectrum white light for inspection
Class II Equipment
Type B applied part Tip, barrier sleeve
MEDICAL EQUIPMENT
WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL 60601-1CAN/CSA-C22.2 No. 601.1, ANSI/AAMI ES60601-1
E490506
(2005, 3rd ed.), CAN/CSA-C22.2 No. 60601-1 (2008),13VA
Follow instructions for use
134
Sterilizable up to the temperature specified (eye protection shield only)
Do not re-use
Dispose of in accordance with the Waste Electrical and Electronic Equipment Directive
2012/19/EU of the European Parliament and the Council of the European Union
IPX4
Protection Class IPX4 – handpiece
Serial Number
SN
Power supply rating
Date of Manufacture
Class II
Type B Applied Part
Operating, off
1 (On/Off)
I (Rule 12) (IEC 60601) UL 60601-1
Pollution Degree 2
Category II (connected to wall outlet)
19
Tabla de contenido
