Operating the Setup Function
Dimmer Setting [DIMMER]
Viewing can become difficult after extended video viewing if the screen is too bright at
night or when ambient light darkens. You can select the brightness level from three set-
tings; HIGH, MID and LOW viewing.
1. Display a source to view. (Refer to page 11.)
2. Select a brightness level.
Each press of the DIMMER button selects the brightness level in the following order:
[HIGH] = [MID] = [LOW] = Exit to [HIGH]
Note:
• Settings are stored by the source and the lighting switch (VIDEO1/VIDEO2, Car lights on/Car
lights off).
14