ProMariner ProSport6 PFC Manual De Instrucciones página 23

Typical Wiring
Fig. 5 ProSport 20, 12 and 8 Two Bank Charger for 2 12V Batteries
with (2) 12 VDC Batteries Connected with a Series Jumper
Note:
Indicates jumper series
Indicates fuse
Installation
When connecting each jacketed battery charger cable, make sure it is connected
to only one 12 VDC battery and observe the polarity and color of all connections:
Red Wire = + (Positive) Battery connection
Black Wire = - (Negative) Battery connection
The black wire can never be connected to a terminal with red wires. Only black.
Important: The pair of red and black wires in 1 cable jacket MUST GO TO THE SAME 12VDC battery.
Note 1: One bank cable connects to no more than one battery
Note 2: ProSport is designed to be used with group 24, 27, 30 and 31 batteries
Dedicated 24 VDC Trolling Motor Battery Configuration
ProSport 12
For engine battery use
cable 1
this bank cable only
_
bat 1
+
Two 12 VDC Batteries connected with a series
jumper for a 24 VDC Trolling Motor
W I R I N G D I A G R A M S
cable 2
_
Top view
bat 2
of battery
+
20