Timed Dry Cycle - Haier GDE 750AW Manual Para El Usuario E Instrucciones De Instalación

English
AUTO DRY CYCLE
GDE/GDG 750AW
1. Turn the knob to any program except "OFF" to power on. The control panel will beep
once and the dryer will change from "OFF" to the operating status.
2. Set the cycle select dial to required auto dry cycle. The signal, temperature, and dry
levels are preprogrammed. To change this setting:
• Press the "Dry Level" button to select suitable drying level after powering on the
dryer. There are 3 options to choose from: More, Normal, or Less.
• Press the "Temp" button to set a suitable drying temperature.
• After powering on and selecting the cycle, the dryer selects the pre-programmed
temperature. If a different drying temperature is required, press the "Temp" button
to select. There are four available drying temperatures: High, medium, Low, and
No Heat.
• Press the "Signal" button, and the buzzer will sound upon end of cycle.
• After switching on, the dryer automatically sets buzzer at "Softer". The user
can choose from Louder, Softer, or OFF.
• Press Start/Pause button.
• When starting the machine, close the door first, then press this button.
• If a pause is needed during drying, press this button. Pressing again will
resume operation.
Note: Your dryer has a preprogrammed wrinkle saver cycle. At the end of the autodry
cycle, the beeper will signal that the load is dry. If ignored, the drum will turn
for about one minute out of every five minutes, up to one hour. When the door
is opened, the feature shuts off.

TIMED DRY CYCLE

Super Capacity
GDE/GDG 950AW
1. Press any button except "Off" button to power on.
2. Press "Timed-Dry Cycles" button and select "Timed Dry" cycle.
• After powering on, press "Timed-Dry Cycle" button to select "Timed Dry" program.
3. Press "More Time" and "Less Time" buttons to set a suitable time.
•
After setting "Timed-Dry Cycle" to "Timed Dry," you can press these two buttons
to increase or decrease drying time as you desire.
4-6. Press buttons "Temp," "Cycle Signal," and "Wrinkle Saver" to define your desired
program.
25
Heavy Duty Press Free
Dry
Normal Delicate
Cool Down
Whites
Touch Up
Timed Dry
Cycle Completed
Bulky Custom
Rack Dry
Auto
Timed
Less More
Dry
Dry
Time Time
Cycles Cycles
High
Wrinkle Saver
Very
More
Medium Louder
Remaining Time Normal
Less
Low Softer
Extended Tumble
Damp
No Heat Off
Sensor
Signal
Wrinkle
Dry Temp
Saver
Level
Start
Pause
Off