Rack Dry Cycle - Haier GDE 750AW Manual Para El Usuario E Instrucciones De Instalación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Note: For "Timed Dry" program, use of buttons "Temp," "Cycle Signal," and "Wrinkle
Saver" is the same as for auto-programs. "Sensor Dryness Level" is inactive, and a
beep will sound if pressed.
7.
Press "Start/Pause" button.
T IM E D DR Y C Y C L E
GDE/GDG
750AW
1.
Turn the knob to any program except "OFF" to power on. The control panel
will beep once and the dryer will change from "OFF" to the operating status. If
Start/Pause button is not pressed five minutes after powering on, the dryer will
automatically return to OFF status.
2.
Set the cycle select dial to Timed Dry Cycle.
3.
Press "Timed Dry" button to set the required drying time.
4-6. Press "Temp" and "Signal" to define the required programs. Note: For "Timed Dry"
program use of "Temp" and "Signal" buttons is the same as for auto-programs. "Dry
Level" is inactive.
R AC K DR Y C Y C L E
Super Capacity
1.
Press any button except "Off" button to power on.
2.
Press "Timed-Dry Cycles" button and select "Rack Dry" cycle.
• After powering on, press "Timed-Dry Cycle" button to select "Rack Dry" program.
3.
Press "More Time" And "Less Time" buttons to set a suitable time.
• After setting "Timed-Dry Cycle" to "Rack Dry", you can press these two buttons
to increase or decrease drying time as you desire.
4-7. Press buttons "Temp," "Signal," "Wrinkle Saver," and "Touch Up" to define
your desired program.
Notes : For "Rack Dry" program, use of buttons "Temp," "Signal," "Wrinkle Saver," and
"Touch up" is the same as for auto-programs. "Sensor Dry Level" is inactive, and
a beep will sound if pressed.
8.
Press "Start/Pause" button.
Cycle Select
Off
Timed D ry
More
High
No rmal
Medium
Less
Low
Rack D ry
No Heat
Dry
Level
Temp
Touch Up
Delicates
Timed Dry
Heavy Duty
Press Free
Dry
Nor mal
Delicate
Cool Down
Whites
Touch Up
Timed Dr y
Cycle Completed
Extended T
Bulky
Custom
Rack Dr y
Auto
Timed
Less
More
Dry
Dry
Time
Time
Cycles
Cycles
90
Heavy Duty
Louder
60
Softer
30
Off
20
Normal
10
Signal
Timed D ry
Whites
Auto Dry
High
W rinkle Saver
Very
More
Medium
Louder
Remaining T ime
Nor mal
Less
Low
Softer
umble
Damp
No Heat
Off
Off
Sensor
Signal
W rinkle
Dry
Temp
Saver
Level
English
Clean Lint
Drying
Cool Down
W rinkle Saver
Cycle Process
Start
Pause
26
Tabla de contenido
loading

Este manual también es adecuado para:

Gdg 750awGde 950awGdg 950aw

Tabla de contenido