What You'll Need; Winches/Srl's With Retrieval; Mounting Bracket(S) For Rescue Davit; Portable Fall Arrest Post - Sperian Miller DuraHoist Manual De Instrucciones

4.0 What You'll Need

This map gives you the basic layout of compatible apparatuses for the DuraHoist Portable Fall Arrest System, which consists of
three general subsystems. In order to have a fully functional structure, you must satisfy each category; a winch/SRL with retrieval
and a Mounting Bracket, a Portable Fall Arrest (PFA) Post, and a Mounting Base.
1. Winches/SRL's with Retrieval & Mounting
Bracket(s) for Rescue Davit Arm
For specific installation instructions on the Winches/SRL's, view the
instruction manuals at www.millerfallprotection.com
The Miller MightEvac Self Retracting
Lifeline w/Emergency Retrieval Hoist
+
The Miller ManHandler Hoist/Winch

2. Portable Fall Arrest Post, 14"

Extension Post & Davit Arm
DH-AP-1
PFA Post
The Portable Fall Arrest Post may be equipped with a variety of accessories to meet
additional confined space entry/retrieval, rescue, or fall protection requirements. Use of these
accessories may affect the rating and load carrying capacities of the Post. Be aware of any limita-
tions imposed on the system by the use of various accessories, and follow any restrictions given on the various product specification
sheets, warning labels, this manual and/or related manuals.
Us e r I nst r uct i o ns - E ngl i sh
+
DH-AP-11 (spacer required)
Adapter bracket for MightEvac
For use in the lower mounting
position only.
DH-AP-11 (no spacer)
Adapter bracket for ManHandler
For use in the upper mounting position only.
DH-AP-2
14" Extension Post
3. Mounting Bases
DH Mounting Bases are designed to meet both
permanent or portable installation requirements.
These mounting bases are compatible with all
Miller DuraHoist Portable Fall Arrest System
Posts and Accessories. For specific installation
instructions/restrictions view the specification
sheets at www.millerfallprotection.com
Spacer
DH-AP-3
Davit Arm
8
DH-AP-4
Plate with Tie-Off Anchor
for use in steel applications
-Permanent installation
DH-AP-5
Standard Plate for use in
steel applications
-Permanent installation
DH-AP-6
Plate for Inclined Surfaces
with Tie-Off Anchor for use
in steel applications
-Permanent installation
DH-AP-7
Plate for Inclined Surfaces
for use in steel applications
-Permanent installation
DH-AP-9
Portable I-beam Clamp-
ing Base for use in steel
applications
-Portable installation
DH-AP-12
Bolt on Anchor Plate for
use in concrete or steel
applications
-Permanent and portable
installation
Dotted line denotes
an optional accessory