Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
The appliance must be installed in a well-ventilated
room.
Do not obstruct any air vents or drains present on
the appliance.
Do not tamper with appliance components.
Appliance maintenance and conversion to a
different type of gas must be carried out by
qualified
technicians
manufacturer, in compliance with current safety
standards and the instructions in this manual.
16. CONVERSION TO ANOTHER TYPE OF
GAS
See Chapter " Instructions for installation ".
17. COMMISSIONING
See Chapter " Instructions for installation ".
18. TROUBLESHOOTING
LABEL
CAUSE
THE COOKING
MALFUNCTIO
THE BUZZER
Er1
N CHAMBER
TEMP. PROBE
THE COOKING
CYCLE ONLY
MALFUNCTIO
IF THERE IS IN
ER2
N CORE
PROGRESS A
PROBE
CORE PROBE
PHASE. THE
authorized
by
CORRECTIVE
MESSAGE
MEASURE
BLOCK OF
CYCLE IN
PROGRESS.
REPLACE THE
CHAMBER
BEEPS FOR
TEMPERATUR
FIVE
E PROBE
SECONDS
EVERY
TWENTY.
BLOCK OF
REPLACE THE
CORE PROBE
COOKING
the
d-r
DOOR OPEN
GAS
ALL
CHAMBER
THERMAL
Alt
ALARM
OVEN
THE OVEN DOES NOT START
- Check that the multiple pole switch is closed and
there is mains voltage.
- Check that the gas shut-off cock upstream of the
appliance is open.
- Check integrity of the oven protection fuses.
- Ensure the oven door is correctly closed.
- Check to have correctly set the cooking cycle
parameters.
- Ascertain the oven is not in error.
THE FAN STOPS DURING FUNCTIONING.
- Switch-off the oven and wait for the motor thermal
protection to automatically reset.
- Ensure that the cooling inlets are not obstructed.
WATER DOES NOT FLOW INTO THE HUMIDIFIER
27
BUZZER
BEEPS FOR
FIVE SECODS
EVERY
TWENTY.
DEACTIVATIO
N OF THE
EXITS. THE
CYCLE IS NOT
BLOCKED
CLOSE THE
AND
DOOR
RESTARTS
WHEN THE
DOOR IS
CLOSED.
BLOCK OF
CHECK THE
THE CYCLE IN
GAS SYSTEM
PROGRESS.
PRESS THE
RED BUTTON
BLOCK OF
ON THE
THE CYCLE IN
SAFETY
PROGRESS.
THERMOSTAT
BODY.
Tabla de contenido
Solución de problemas
