Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6) OPERATION
1) Turn on the power source.
2) Adjust the wire speed, the power source voltage, the burnback time and the shielding gas according to
the wire diameter, thickness and material to be weld.
3) Start the welding and re-adjust the parameters, if needed.
7) MAINTENANCE
7.1) Recomendations
The wire feeder requires little maintenance in normal environment and opperation conditions. It is sufficient
to blow it dry clean using dry compressed air free from oil once a month.
After cleaning the equipment with blow dry air, check that the electric connections and components are
properly fixed. Check for possible faults in the wire isolations or electric cables, including the welding cable
and any others and if any of them is faulty substitute it.
When working with damaged wires or cable or with worn out isolation, the non-isolated parts, can become
in contact with another part of an earth connected object.The electric arc which results from this contact can
hurt the eyes if not protected and cause a fire. The body contact of a part with another conductor without
isolation can cause a violent electric hazard, burns and even death.
N.B.: Cleaning and preventive maintenance should be intensified when
operating in environment contaminated by dust, soot or any other poluent which
can cause damage or harm to the performance.
ATTENTION:
In case of doubts about the operation or maintenance of this or any other ESAB product brand and
manufacturing, contact the department of Tecnical Service or an authorized ESAB Service.
7.2) Repair
In order to ensure the perfect functioning and performance of a ESAB equipment, use only original parts
supplied by ESAB or approved by them. All guarantee undertakings from the supplier cease to apply if the
customer uses non-original or non-approved parts when replacing any of them.
Spare parts can be obtained from the ESAB Authorized Services or from its Sales Distributors listed on the
last page of this Manual. Always inform the Equipment Model and Serial Number.
31
Tabla de contenido
