Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Problem
Nothing appears in the
display, even when the
device is turned on.
The cuff does not
inflate.
The device does not
measure.
Readings are too high
or too low.
Other
Note: If the actions described above do not solve the problem, contact the dealer. Do not attempt to open or repair
this product yourself, as any attempt to do so will make your warranty invalid.
Troubleshooting
Possible Reason
Batteries are drained.
Battery terminals are not in the correct
position.
Battery voltage is too low.
(LOW BATTERY mark) blinks. If
the batteries are drained completely, the
mark does not appear.
The cuff is not applied properly.
You moved your wrist or body during the
measurement.
The cuff position is not correct.
The value is different from that measured
at a clinic or doctor's office.
Replace all batteries with new ones.
Reinstall the batteries with negative and positive
terminals matching those indicated in the battery
compartment.
Replace all batteries with new ones.
Apply the cuff correctly.
Make sure you remain very still and quiet during
the measurement.
Sit comfortably and still.
Raise your hand so that the cuff is at the same
level as your heart.
If you have a very weak or irregular heat beat, the
device may have difficulty in determining your
blood pressure.
See "Why Measure Blood Pressure at Home?".
Remove the batteries. Place them back properly
and try measurement again.
English 19
Recommended Action
Capítulos
Tabla de contenido
