Troubleshooting - A&D Medical PREMIUM WIRELESS Manual De Instrucciones

TROUBLESHOOTING

Symptom
Power
does not
turn on.
The cuff
does not
inflate.
Monitor
is not
connecting
to
The device
does not
measure.
Readings
are too
high or too
low.
Probable Cause
Low Battery.
Blood Pressure
monitor internal
error.
Battery charging
cable is connected.
Low Battery.
Airplane mode is
ON
Blood Pressure
monitor internal
error.
You moved your
arm or body during
measurement.
––––
The cuff position is
not correct.
Treatment
Charge the battery.
Press the Reset Switch.
Remove the charging cable.
Charge the battery.
Check page E-24 to turn Airplane
mode OFF
Press the Reset Switch.
Make sure you remain still and
quiet during measurement.
If you have a very weak or
irregular heartbeat, the device
may have difficulty in determining
your blood pressure.
Sit comfortably and still. Place
your arm on a table with your
palm facing upward and the cuff
at the same level as your heart.
E-25