Measurements - A&D Medical UB-543 Manual De Instrucciones

Note: The UB-543, once used, will provide an inflation appropriate to the user.
1. Wrap the cuff around your wrist. Sit comfortably with the cuff at the same level
as your heart and relax.
2. Press the button. All of the display segments are displayed.
START
3. Select a user from user
Adjust and keep the height of the cuff (with
heart using the C.P.G. indicator.
Note: If you do not use user selection, wait for the inflation for several seconds.
If you do not use the C.P.G. function, the C.P.G. indicator is not displayed.
4. Zero (0) is displayed blinking briefly. Then the display changes, as
measurement begins. The cuff starts to inflate. It is normal for the cuff
to feel very tight. The measurement starts automatically when
inflation starts, and the
Note: If you wish to stop inflation at any time, press the
5. When the measurement is complete, the device displays readings
( of the systolic and diastolic pressure readings, pulse rate, WHO
classification, I.H.B. symbol and C.P.G. indicator). While readings are
displayed, the date and time are displayed alternately. The cuff
exhausts the remaining air and completely deflates automatically.
Note: If you do not want to store new readings in memory, press the
button while readings are displayed.
6. Press the
START
Notes: The device is provided with an automatic power shut-off function. Allow at least one minute between measurements on the same person.

Measurements

and user using the
blue
(heart mark) blinks.
button again to turn the device off. Remove the cuff.
button immediately.
SET
light) to the same level as your
button again.
START
E n i l g h s 1 2
All segments
User or user :
The C.P .G. indicator: Orange Blue Orange
LOW LEVEL HIGH
At heart level
Zero display
Inflation is started
Inflating and
Measurement in progress
Systolic pressure
Diastolic pressure
JNC7 classification
I.H.B. symbol
Pulse rate
The C.P .G. indicator
button
SET