Recalling The Memory Data - A&D Medical UB-543 Manual De Instrucciones

Note: This device stores the last 60 measurements in memory.
1. Press the button when turning the device off.
The average of all measurements and the number of data are displayed.
If no data, "0" is displayed. Press the
device off.
2. Use the following buttons to display data (of number and measurement data).
Select a user from user
The device displays the average of all measurements and the
number of data are displayed.
Pressing the button each time , the device displays as follows:
Average data of all AM (morning) measurements taken between
4:00 and 9:59. In the example, If no data,
Average data of all PM (evening) measurements taken between
18:00 and 1:59.
Data (of number and measurement data).
The device displays in order from most recent data. The date
and time are displayed alternately while displaying the
measurement data.
In the example: No.30 & data
3. If you press the button after oldest data is displayed, the device
proceeds to step 1, the average of all measurements and the number of
data are displayed.
4. Press the
START
After one minute of non-operation, the device will turn off automatically.

Recalling the Memory Data

or
and user using the
No.29 & data
button to turn the device off.
button to turn the
START
button.
SET
is displayed.
No.01 & data.
English 13
Memory mode
User selection
Example: user
Average of all the data
Number of all data
Average for AM data
AM indicator
Number of AM data
Average for PM data
PM indicator
Number of PM data
Ex.: No.30
Most recent data
Date
Time
3 seconds
Last data (Oldest)
Date
Time
3 seconds
Turn off
button
button
button
button
button
button
button
button
Turn off