User's Manual - Ryobi ERO-2412VN Manual De Utilización

GB
FR DE ES
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
Always wear safety goggles and a dust mask
Q
when sanding, especially sanding over-head.
The machine is not suitable for wet sanding.
Q
Do not use sanding paper larger than needed.
Q
Extra paper extending beyound the sanding pad can
also cause serious lacerations.
The dust bag shall be equipped with the tool.
Q
And it shall be emptied frequently. To connect dust bag,
insert the adapter of dust bag to the dust-collection
opening on the rear end of the sander. And screw
the adapter clockwise until the connection is credible.
Disconnect the bag in the reverse order.
WARNING
Do not throw sanding dust on an open fire
because materials in fine particle form may be
explosive.
WARNING
A suitable breathing respirator must be worn
while sanding lead paint, some woods and metal
to avoid breathing the harmful/toxic dust or air.
SYMBOL
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
V.................................................................................Volts
Hz..............................................................................Hertz
.........................................................Alternating Current
W...............................................................................Watts
n ................................................................No load Speed
o
min .....................Revolutions or reciprocation per minute
-1
....................................................................Pad size
....................................................... Orbital Diameter
.....................................................Double Insulation
..........................................Read instruction manual
.................................Recycle raw materials
instead of disposing as waste. The machine,
accessories and packaging should be sorted for
environmental-friendly recycling.
IT NL PT DK SE FI NO RU PL CZ
English
SPECIFICATION
Input
Wattage
No load speed
Orbital diameter
Pad size
Weight
APPLICATIONS
Use only for the purposes listed below:
Sanding on wood surfaces.
Q
Removing rust from and sanding steel surfaces.
Q
Sanding plastics.
Q
DESCRIPTION
1. ON/OFF Switch
2. Quick Change Hook & Loop Pad
3. Sandpaper
4. Variable Speed Control
5. Dust bag frame
6. Dust bag
7. Livetool indicator
FEATURES
Your sander is suitable for sanding with coarse, medium,
and fine grit sandpaper. It will produce a fine scratch free
finish when used to sand with the grain on wood surfaces.
Your sander has a comfortable palm grip handle that
provides maximum one-hand comfort, and reduces
operator fatigue during continuous sanding operations.
Your sander also has a built-in dust collection that
collects dust through punched holes in the sandpaper
and cushion (Fig. 2).
Before attempting to use your sander, familiarize yourself
with all operating features and safety requirements.
SWITCH (1)
This tool is equipped with a simple switch control. To turn
the sander "ON", slide the switch to the left.
Slide the switch to the right to turn the sander "OFF".
VARIABLE SPEED CONTROL (4)
The electronic speed control allows the operator to adjust
speed to meet varity sanding material from tough heavy
grained timber to delicate veneer.
1
HU RO LV LT EE
230 - 240 V
240 W
7000-12000 min
2.4 mm
125 mm
1.7 kg
HR SI SK GR TR
50 Hz
-
1