Lubricating The Tyres; Demounting Agricultural Wheels - SICE S 60 Uso Y Mantenimiento

LUBRICATING THE TYRES

Before fitting or removing the tyre, lubricate the beads carefully to protect them against
possible damage and to facilitate fitting and removal operations.
For the areas to lubricate, refer to figures 19a (mounting tubeless tyres), 19b (demounting
tubeless tyres) and 19c (mounting tyres with an inner tube and bead).
A
It is prohibited to use hydrocarbon based lubricants (oil, petroleum, etc.) or other
substances that maintain the lubricating effect over time.
N.B. The same safety procedure must be observed when both loading and unloading
the wheel.
Bring especially heavy tyres as close as possible to the base before completing
demounting.

DEMOUNTING AGRICULTURAL WHEELS

Clamp the wheel on the turntable.
Always make sure that the arm is correctly hooked to the carriage.
Operate the control lever to lift the wheel so that the rear edge of the rim just touches
the bead breaker disc (B fig. 20).
When the tyre is deflated, turn the turntable in continuation, moving it a little at a time
using the specific control.
To make the bead breaking operation quicker, operate the control that adjusts the ro-
tational speed.
84
B
CAUTION!
CAUTION!
CAUTION!
C
19
User Manual S60