Setting The Rear Camera Input; Setting The Navigation Interruption; Setting The Aux Mode; Adjusting The External Input Audio Level - Alpine IVA-W203 Manual De Operación

Setting the Rear Camera Input

With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / ON
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON: Even if the shift lever is not set to reverse (R), the rear
pictures are output by selecting the CAMERA source.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
• To apply the setting, set to VISUAL "Setting the VISUAL Soft Button"
(page 36).

Setting the Navigation Interruption

With an Alpine Portable navigation system connected to the IVA-W203,
the voice guidance of the navigation system will be mixed with the radio
or CD play.
Setting item: NAV. MIX
Setting contents: OFF / ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
See "Adjusting NAV. Level" under "Adjusting the Audio" on page
25 to set the navigation interruption volume level.
• The volume level for voice prompts during navigation guidance is set
by adjusting the volume while the prompts are announced. When the
announcement finishes, the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume. If a navigation announcement
cuts in while adjusting the audio level, it always resets to the current
level regardless of the audio level setting.

Setting the AUX Mode

Setting item: AUX IN
Setting contents: OFF / ON / VCR / GAME / TV / EXT. DVD
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.

Adjusting the External Input Audio Level

After setting to ON in "Setting the AUX Mode", this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting contents: LOW / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
36
-EN

Setting the Picture Output

Outputs the picture of the source selected on the IVA-W203 connected
to the rear monitor.
Setting item: AUX OUT
Setting contents: OFF / ON
OFF: The "REAR" item is not displayed on the SOURCE
selection screen.
ON: The "REAR" item is displayed on the SOURCE selection
screen.
Touch [REAR] to change to the REAR selection screen,
and then touch the desired source. The selected source
picture is output on the rear monitor.
Setting the Bluetooth Connection
(BLUETOOTH IN)
Setting item: BLUETOOTH IN
Setting contents: NAV. / ADAPTER / OFF
NAV.: Select when the optional portable navigation is
connected.
The TEL screen of the portable navigation is
displayed.
ADAPTER: Select when the optional Bluetooth box is connected.
The TEL screen of the Bluetooth is displayed.
When an external interruption occurs, the display
changes to the TEL screen.
OFF: Select to ignore any external interrupts.
• The setting cannot be made when "Setting the External Device
Interrupt Mode" (page 35) is set to ON.
• For details on Bluetooth operation, refer to the Owner's Manual of
the Bluetooth Box.

Setting the USB Adapter to ON/OFF

If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting contents: OFF / ON
OFF: Does not display the USB source name on the SOURCE
selection screen.
ON: Displays the USB source name on the SOURCE selection
screen.
• If ON is set even when a CD changer is connected, the source name
on the SOURCE selection screen will change from CD CHG to USB.

Setting the VISUAL Soft Button

Setting item: VISUAL KEY
Setting contents: VISUAL / NAV.
VISUAL: Recalls the VISUAL selection screen by touching
[VISUAL].
NAV.: Switches directly to the navigation screen by touching
[VISUAL] (only when Portable Navigation is
connected).