Displaying The Numeric Keypad Input Screen - Alpine IVA-W203 Manual De Operación

Estación multimedia móvil

página de 240

/ 240
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Touch [RADIO].

The screen changes to the Radio mode main display.

Display example for FM Radio main screen

Changes to SETUP selection screen

Changes to VISUAL selection screen

Displays the source name, such as radio band, etc.,

that is selected

Changes to the SOURCE selection screen (to Step 1

screen)

Working state indicator

Displays volume level

Function Guide:

The function guide display varies depending on each

source.

The contents of the function guide change by touching

[P1/2]* or [P1/3]* on the function guide, and many other

operations can be performed.

Displays time

* Display may vary depending on the connected devices.

Touch [SOURCE] on the main source screen to

change to another source screen, and select the

desired source from the SOURCE selection screen.

• The screen can be changed to the VISUAL selection screen by

touching [VISUAL].

Set to VISUAL in "Setting the VISUAL Soft Button" (page 36).

• The screen can be changed to the SETUP selection screen by

touching [SETUP].

• After 5 seconds of each operation in the visual mode, the screen

changes to the visual screen only.

To display the main source screen, touch the display panel, then

touch [CONTROL] on the screen. The SOURCE selection screen

appears by touching [SOURCE] on the changed main source screen.

-EN

Displaying the Numeric Keypad Input

Screen

The numeric keypad input screen is displayed when the DVD mode is

selected for searching a title or chapter. It can also be used for entering a

country code or password for DVD setup, and for selecting a channel

number in the SAT Radio mode etc.

Touch [10KEY] on the main source screen.

Touch the desired numeric key.

Display example for numeric keypad

Operation buttons of this area can be used while