Edit Registration Servers; Data Call Settings; Vpn; Vpn Access Points - Nokia E Serie Guia Del Usuario

S e t t i n g s
Transport type — Select
•
Port — Enter the port number of the proxy server.
•

Edit registration servers

Select Menu Tools Settings
> >
Select from the following:
Registrar serv. addr. — Enter the host name or IP address of the registrar server in use.
•
Realm — Enter the registrar server realm.
•
User name and Password
•
Transport type — Select
•
Port — Enter the port number of the registrar server.
•

Data call settings

Select Menu Tools Settings
> >
To set the time-out period after which data calls automatically end if no data has been transferred, select
the scroll key. Select User defined
Options > Disconnect.

VPN

VPN access points

To manage VPN access points, select
Edit — Edit the selected access point. If the access point is in use or its settings are protected, you cannot edit it.
•
New access point — Create a new VPN access point.
•
Delete — Delete the selected access point.
•

VPN access point settings

Contact your service provider for the correct access point settings.
To edit VPN access point settings, select the access point and Options.
Select from the following:
Connection name — Enter a name for the VPN connection. The maximum length of the name is 30 characters.
•
VPN policy — Select a VPN policy to be used with this access point.
•
Internet access pt. — Select the Internet access point to be used with this VPN access point.
•
Proxy serv. address — Enter the proxy server address of this VPN access point.
•
Proxy port number — Enter the number of the proxy port.
•

Wireless LAN

Select Menu Tools Settings
> >
To have an indicator displayed when there is a wireless LAN available in your current location, select
To select the time interval for your device to scan for available wireless LANs and update the indicator, select
networks.

Advanced WLAN settings

Select Menu Tools Settings
> >
settings are normally defined automatically, and changing them is not recommended.
To edit the settings manually, select
Long retry limit — Enter the maximum number of transmission attempts if the device does not receive a receiving
•
acknowledgement signal from the network.
Short retry limit — Enter the maximum number of transmission attempts if the device does not receive a clear-to-send signal
•
from the network.
RTS threshold — Select the data packet size at which the wireless LAN access point device issues a request to send before
•
sending the packet.
TX power level — Select the power level of your device when sending data.
•
Radio measurements — Enable or disable the radio measurements.
•
Power saving — Enable or disable conservation of battery power.
•
To restore all settings to their original values, select
© 2007 Nokia. All rights reserved.
UDP or TCP.
Connection SIP settings
> >
— Enter your user name and password for the registrar server.
UDP or TCP.
Connection Data
> >
to enter the time yourself or
VPN VPN access points
>
Connection Wireless
> >
Connection Wireless LAN
> >
Automatic config.
Options
> >
call.
Unlimited to keep the connection active until you select
> Options, and from the following:
LAN.
Options
> >
> Disabled, and define the following:
Options Restore defaults.
>
83
Add new or Edit Registrar
>
Show availability
Advanced settings. The wireless LAN advanced
server.
Online time, and press
> Yes.
Scan for