Specifying Current Time And Sender Information - Oki MC361 Guia De Instalacion

Specifying Current Time and
Sender Information
Note
You can set up the date and time automatically
using the Webpage. For details, refer to the
Advanced User's Guide at www.my.okidata.com.
Note
When using the arrow keys, press the key
repetitively to go to the selection.
1 Press <SETTING> on the control panel.
2 Use the down arrow key to select [Easy
Setup], then press <OK>.
3 If prompted, entire the Admin Password, then
use the arrow keys to highlight [Enter] and
press <OK>.
4 With [Date/Time Setting] highlighted, press
the right arrow key.
5 Use the down arrow key to select the
appropriate time zone and then press the
right arrow key.
You can select the time zone between [-12:00]
and [+13:00] in 15 minute increments.
6 Use the down arrow key to select [Not
Summer Time] or [Now Summer Time] for
daylight saving, then press the right arrow
key.
7 Use the down arrow key to select [Manual],
then press the right arrow key.
8 Use the up and down arrow keys to set the
Year, Month and Day, pressing the right arrow
key to move to each successive block. When
done press <OK>.
9 Use the up and down arrow keys to set the
current time (Hour, Minute, Seconds),
pressing the right arrow key to move to each
successive block. When done press <OK>.
"Date/Time Setting was completed" appears
on the display, then the Setup Menu screen
appears.
Specifying Sender Information
Specify the fax number and sender name for your
machine. The sender ID is printed on the top
edge of the fax when it is printed by the recipient.
10 Press the down arrow key to select [Fax
Setting], then press the right arrow key.
11 Press <OK> to select [FAX number].
12 Use the keypad to enter the fax number of
your machine.
13 With [Enter] highlighted, press <OK>.
14 Press the right arrow to select [Sender ID].
15 Use the screen keypad to enter your ID, up to
22 digits. When the ID is entered, use the
arrow keys to highlight [Enter], then press
<OK>.
"Fax Setting was completed" appears on the
display, then the Setup Menu screen appears.
16 Press <OK> to complete the setup, then use
the left arrow key to back out to the main
screen.
47 - English