Control And Measurement Panel; Protection Functions - HYDROLAB HLP Serie Instrucciones De Uso

A built-in conductometer measures the conductivity and temperature of purified water, and feed water
pressure. Pressure value determines the system operation status (if it is operating, the value is equal to the
pressure applied on RO module; if it is turned off, it equals zero)

6.1 Control and measurement panel

The device contains an automatics with a microprocessor control
and measurement system that has:
LCD display (models with automatics of type A)
Reading all of the parameters displayed on the panel should take place during system
operation (while collecting water - tap open). All alarms should be verified during
water collection (tap open) - collect at least 0.5 l of water.

6.2 Protection functions

The demineralizer turns on automatically when the demi water is being collected and is working until it
replenishes the tank. Once the tank is full, the device will reach a certain value of pressure and the device will
automatically cut off the feed water, and manometer value indication will drop to 0.
Demineralizers from „P" „SP" and „UV" series also contain a membrane pump and low/high pressure sensors.
The pump operation and the device itself is maintenance-free. Automatic pump turn off occurs when:
- The feed water pressure is too low
- The tank is full
- No feed water is present
CAUTION!
61